Description

Product Specifications:

• Quantity: 50
• Shank Diameter: 10mm
• Drill Size: 10mm
• Length: 100mm
• Effective Anchor Depth: 50mm
• Wrench Size:15mm
• Head Flange Diameter: 22.5mm
• Finish: Mechanical Galvanised
• Recommend Tension Load 32MPa (50mm Embedment): 4.8kN
• Recommend Tension Load 32MPa (90mm Embedment): 13.6kN

Description

Scrooz Screw Bolt Anchors Contractor Range are high-strength, self-tapping galvanised masonry anchors engineered for fast, secure installation into concrete, brick, block, and masonry without expansion plugs or sleeves. Ideal for construction, engineering, and renovation projects, these screw bolts offer reliable, cost-effective anchoring solutions for a huge variety of applications. Often referred to by the trademarked brand name “Ankascrews”, Screw bolt anchors are one of the most popular concrete fixings within Australia and are used in applications from fixing clips and saddles, anchoring down house frames to large scale commercial projects.

Our screw bolt anchors feature a deep-cutting helical thread design that cuts precise internal threads into concrete and masonry, delivering high pull-out and shear resistance, even near edges or in cracked substrates. The hex-flanged head with a milled bearing face ensures even load distribution and eliminates the need for separate washers. Spiral fluted shanks efficiently remove drilling debris during installation, preventing jamming and improving drive speed.

Key Features:

• Deep-thread cutting for strong grip and high holding power
• Non-expansive design; ideal for edge-close fixing
• Fully removable and reusable
• Drill sizes match bolt diameters (e.g., 8?mm bolt = 8?mm hole)
• Typical pull-out strength: 2 – 5?kN depending on size and concrete strength
• Hex flange head with built-in load spreading
• Sizes: M6 x 30?mm to M16 x 200?mm